VIPER
AEROSOL COIL CLEANER
Viper is a potent degreasing compound that does not contain any hazardous ingredients or give off toxic fumes. Use it to clean small indoor kitchen equipment, condenser and evaporator coils. No need to rinse the evaporator and the condenser only needs a light water rinse for minimal clean-up. The aerosol injector produces a pin spray of expanding foam that penetrates deep in between the coil fins. The foam will liquefy after a few minutes removing heavily imbedded grease and grime.
NYLOG BLUE GASKET & THREAD SEALANT
Nylog Blue is an elastic fluid made from synthetic refrigeration grade compressor oil. Nylog Blue is fully miscible and compatible with all system refrigerants and oils. Gaskets coated with Nylog will never dry or become heat fixed to the surface. Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.
WETRAG HEAT BLOCKING PUTTY
This reusable heat blocking putty keeps piping and sensitive components cooler than traditional wet rag applications during brazing, soldering, or welding. It is made from the same materials found in the heat shield of the space shuttle. Simply apply, remove, and reuse.
- Reusable up to 40 Times
- Withstands Temperatures over 2000 °F
- Blocks Direct and Conductive Heat
- Indicator Dye Fades as Product Wears Out
BIG BLU BRUSH ON MICRO LEAK DETECTOR
This is our original Big Blu microleak detector downsized into a Brush On applicator. This product is great for spot leak applications and is supplied with a 10 inch extension dauber.
- NSF certified for use around food
- Non-Corrosive
- Detects Micro Leaks down to 0.74 oz/year
- Safe on any type of gas